Expert Answers about CrossRoads Zinger Travel Trailer
- Replacement Awning for a 2019 CrossRoads Zinger Travel Trailer
- We have complete awning kits here at etrailer.
For your 2019 CrossRoads Zinger Travel Trailer, I was unable to find the specs of the stock awning. So, in order to choose the right one for you, you will need the bracket length (measure from the bottom to the top of one bracket) and the overall length (measure from the middle of one bracket to the middle of the other).
I've linked to a list of our awnings below, but a good one is the Solera 12V XL Power RV Awning - 15' Wide - Extra-Long...
view full answer... - Replacement Brake Assemblies and Hub/Drums for 2013 CrossRoads Zinger Travel Trailer
- For the broken brake assembly the TruRyde kit part # TRU36FR would be your best option for a self adjusting brake set that comes with a replacement left and right hand side assembly. Then for replacement hub/drums you'd want the part # AKHD-545-35-EZ-K which comes with new bearings and seals.
view full answer... - Would Optronics Flexible LED Light Strip # UCL90CB Replace Carefree Awning Light
- Yes the Optronics Flexible LED Light Strip # UCL90CB would replace your Carefree LED lights and would splice right to the same wiring of what you have now.
view full answer... - Replacement Cable for Toy Hauler Garage Door Patio
- Sounds like you're looking for the Replacement Lippert Garage Door Cable for Toy Hauler Patio Doors # LC39FR. This measures 121-1/4" long so you'll want to make sure that works for your application.
Please note that this cable is meant to basically hold a patio door in place. Not all toy hauler doors are able to be used as patios though so you'll need to make sure your door has a construction like the Lippert Patio Upgrade Kit # LC27FR and it wasn't designed to just be a ramp.
view full answer... - Replacement Awning For CrossRoads Zinger Travel Trailer
- Selecting an awning for your 2013 CrossRoads Zinger Travel Trailer, you will need the bracket length (measure from the bottom to the top of one bracket) and the overall length (measure from the middle of one bracket to the middle of the other). If you have an awning installed currently, you have sufficient backing for replacing it. Depending on the siding and the tool, many times you can use a stud finder on an RV as well to identify mounting locations. These awning are typically installed...
view full answer... - Replacement Crank Handle Option For An Older Atwood Power Jack
- Since Atwood has gone out of business, their replacement parts are pretty hard to find.
With that being said, the:
-Replacement Crank Handle for Stromberg Carlson Landing Gear # LG-119226 will fit most Atwood jacks, however this crank handle will be quite a bit longer than your current handle.
view full answer...
Go To Results